MPX-SOUNDER-4 V2
Conventional
Produits similaires
-
-
Incendie
ZEOS-C-S
Rate of Rise/Fixed Temp Heat Detector
Supply Voltage : 10-30 V DC
Current – Quiescent :
Heat: 7 uA / Smoke: 33 uA / Smoke & Heat: 35 uA
Current – Device In Alarm : 24 mA – Alarm LEDs
Sensitivity: According to N54-5 or/and EN54-7
Cable Size : 0.5-2.5 mm²
Reset/Start-Up Times : 20s max
Colour / Case Material : White / ABS
Max. Humidity : 95% RH Non-Condensing
Normal / Transient Oper. Temperature :0ºC to 50ºC / -10ºC to 85ºC
Dim : 100 mm(D)x50 mm(H)
Weight : 92 g & 144 g inc. base
Compatibility : ORION, ORION MINI, ORION EX, ORION-PLUS, QUAD ZMU and ZMU -
Incendie
INT-TCP/IP V2
Interface Panel to PC Software
- supply voltage : 20 to 30V DC
- Supply current : 28 mA
- Configuration : Remotely via Wi-Fi, web page
- Communication connector : Ethernet RJ45, Wi-Fi 2,4GHZ, BLE (Bluetooth Low Energy)
- Input : Reset as default (advanced configurations)
- Operating temperature : -10ºC to 50ºC
- Dimensions : 90 © x 40 (A) mm
- Weight : 24 g
- Compatibility : Windows XP/7/8/10, MacOS, Linux, Android, IOS
- Panel compatibility : OCTO+, GEKKO, G-One and NODE+
- Software compatibility : OWL and ODYSSEY (both GFE products)
-
Incendie
GEKKO 2L
- 2 loops panel
- Supports connection to Repeaters via RS422, Fibre-Optic or TCP/IP
- Networkable panel, compatible with OCTO+ and NODE+ range of panels
- Up to 250 devices per loop (only 125 addresses available)
- Up to 95 VULCAN 2 (addressable) ultra low current base sounders (32 address limit)
- 32 individually programmable sounder addresses
- Full Self-Addressable Devices support
- 2 Fire output relays (change-over) and 1 Fault relay (NC – opens on fault)
- 2 conventional alarm outputs (Individually programmable)
- Both detection loops monitored for integrity
- 512 fully programmable sounder and I/O groups
- 384 fully programmable zones
- Event log (rolling, 10000 entries)
- Available only with ZEOS protocol
- Compatible with all our own low cost ancillary modules
-
Incendie
VALKYRIE-CSB-RED
Conventional Wall Mount – Sounder/ Beacon
- Supply Voltage: 20Vto30VDC
- Loop Current-Quiescent: 0.5mA • Loop Current – Alarm Beacon : 3 mA Max.
- Max. Cable Size : 2.5 mm²
- Operating Temperature : -10ºC to 55ºC
- Max. Humidity : 95% RH Non-Condensing
- Case Material : ABS • Colour : Red or White
- Protection Category : IP44 – Type A – Indoor use
